|
|
™
The Multi-Hole Infinite Rim Mold™ comes with five
holes and is designed to make any size marble between approximately 3/8 inches
and 1-1/2 inches. The four smaller holes are in the front of the
paddle and the larger fifth hole is in the center of the back.
Click above for Larger Image
There are currently six molds available. The smaller sizes are contained in a multi-hole mold, and the larger sizes are in individual molds. Below is a table showing the hole sizes and the corresponding range of marble sizes that can be made using each hole.
| Item # | Hole Size | Marble Size Range | |
| IRM-M | 1/2" | ~ 3/8" to ~ 5/8" | |
| 5/8" | ~ 1/2 to ~3/4" | ||
| 3/4" | ~ 5/8 to ~ 7/8" | ||
| 1" | ~ 13/16 to ~ 1-1/4" | ||
| 1-1/4" | ~ 1-1/8" to ~ 1-1/2" | ||
| IRM-1.5 | 1-1/2" | ~ 1-1/4" to ~ 1-3/4" | |
| IRM-2 |
2" |
~ 1-5/8" to ~ 2-3/8" | |
| IRM-2.5 |
2.5" |
~ 2-1/8" to ~ 2-7/8" | |
| IRM-3 |
3" |
~ 2-5/8" to ~ 3-1/2" | |
| IRM-4 |
4" |
~ 3-1/4" to ~ 4-5/8" | |
Click on the item number to view the individual molds.
Copyright © 1998 - 2010
All Rights Reserved